MS004218-电子系统工程设计

时间:2018-04-23浏览:1601

研究生课程开设申请表

 开课院(系、所):  信息学院

 课程申请开设类型: 新开□√     重开□     更名□请在内打勾,下同

课程

名称

中文

电子系统工程设计

英文

Engineering Design of Electronic System

待分配课程编号

MS004218

课程适用学位级别

博士


硕士

总学时

32

课内学时

32

学分

2

实践环节


用机小时


课程类别

公共基础     专业基础     □ √专业必修     专业选修

开课院()

信息科学与工程学院

开课学期

春季

考核方式

A.笔试(开卷   闭卷)      B. 口试    

C.笔试与口试结合               D. □√其他   考查                     

课程负责人

教师

姓名

王志功(电路)

职称

教授

e-mail

zgwang@seu.edu.cn

网页地址


授课语言

中文

课件地址


适用学科范围

电子与信息工程

所属一级学科名称

电子科学与技术

实验(案例)个数


先修课程


教学用书

教材名称

教材编者

出版社

出版年月

版次

主要教材






主要参考书

Modern Receiver Front-Ends

Joy Laskar, Babak Matinpour, etc.

John Wiley & Sons, Inc.


2004













一、课程介绍(含教学目标、教学要求等)300字以内)

《电子系统工程设计》课程主要通过具体的电子系统工程开发案例的介绍向学生灌输工程设计的基本理念和方法,它对学生未来参与到系统工程开发中起着指导作用,其主要内容有:电子系统工程设计的一般流程和方法、通信系统与芯片设计的相关案例等。特色在于基本理论阐述和实践介绍相结合,给学生呈现大量的设计案例,从而使学生形成电子系统工程设计的概念,进一步为专业硕士的工程开发能力打下良好的基础。


二、教学大纲(含章节目录):(可附页)

第一章 光纤通信系统设计与案例分析

第二章 生物信息采集、处理与通信系统设计与案例分析

第三章 基于FPGA的通信系统设计与案例分析

第四章 无线收发芯片设计与案例分析

第五章 宽带无线通信系统设计与案例分析


三、教学周历

 周次

 教学内容

 教学方式

1

 光纤通信系统设计与案例分析(上)

 讲课

2

 光纤通信系统设计与案例分析(下)

 讲课

3

 生物信息采集、处理与通信系统设计与案例分析

 讲课

4

 基于FPGA的通信系统设计与案例分析

 讲课

5

 无线收发芯片设计与案例分析(上)(企业)

 讲课

6

 无线收发芯片设计与案例分析(下)(企业)

 讲课

7

 宽带无线通信系统设计与案例分析(企业)

 讲课

8


 讲课

9


 讲课

10


 讲课

11


 讲课

12


 讲课

13



14



15



16



17



18



 注:1.以上一、二、三项内容将作为中文教学大纲,在研究生院中文网页上公布,四、五内容将保存在研究生院。2.开课学期为:春季、秋季或春秋季。3.授课语言为:汉语、英语或双语教学。4.适用学科范围为:公共,一级,二级,三级。5.实践环节为:实验、调研、研究报告等。6.教学方式为:讲课、讨论、实验等。7.学位课程考试必须是笔试。8.课件地址指在网络上已经有的课程课件地址。9.主讲教师简介主要为基本信息(出生年月、性别、学历学位、专业职称等)、研究方向、教学与科研成果,以100500字为宜。

四、主讲教师简介:

1王志功教授,博士生导师,19731981年先后在南京工学院(现东南大学)无线电工程系学习、任助教和攻读硕士; 1982年赴同济大学任教; 19841990年先后在德国波鸿鲁尔大学电子系进修和攻读博士; 19901997年先后在德国弗朗霍夫应用固体物理研究所做博士后和任客座研究员;199710月作为国务院归国定居专家回国工作, 受聘为东南大学无线电系教授, 博士生导师, 电路与系统学科带头人,领导建立了东南大学射频与光电集成电路研究所, 担任所长。

迄今为止已在国际和国家级重要会议和核心期刊上已发表论文500余篇;出版专著3部,译著6部和教科书10本,共发行10万余册;获得德国、中国和国际发明专利30项。受聘为复旦、大连理工等20多所中国大学以及加拿大Carleton大学和澳大利亚Edith Cowan大学兼职教授。

1998年获得“国家杰出青年科学基金”。1998-2004年担任国家863计划光电子主题专家组专家。2000年荣获教育部长江学者特聘教授。2001年以来担任教育部高等学校电子电气基础课程教学指导分委员会主任委员。2009年受聘为国务院学位委员会第六届学科评议组电子科学与技术组成员。2009年以来,担任全国工程教育专业认证委员会电气信息类专业工作组专家。2011年荣膺“中国侨联特聘专家”。2012年任电子学会理事。

2庆生,教授,博士生导师,1997年获得上海交通大学博士学位。1997-1999年在中国科技大学从事博士后研究,1999-2002年在中兴通讯从事网络产片的研发工作,主要参加了国家“863”重大专项“高速信息示范网”的“核心路由器”项目的研制,该核心路由器已成功走向市场,并且获得了国家科技进步二等奖。2002-2003年在香港科技大学电子系和计算机系从事研究工作,是香港RGC项目“高性能网络交换系统”的主要参加者,研究设计了256256高速网络调度芯片。2003年起任教于东南大学信息学院,先后主持了国家自然科学基金面上项目和“十一五”国家“863”项目“高速并行光互连”的研究,并均已结题验收。还参与及主持了其他多项"863"项目和企业合作项目。获得多项中国发明专利,发表论文50多篇,有40多篇被EI收录。

3叶松,毕业于多伦多大学,师从C.SalamaK.MartineJ.Long教授,获微电子和通信双硕士学位。1990-1995年在国内从事保密通信工作, 负责国家机要保密通信系统及终端的研制, 1993年获党政机要一等奖。1994年完成了97香港驻军的通信设备的研制。1996-2005年在国外期间,曾多次负责美国、加拿大、日本国家级项目及重点项目,先后任职于OKIMotorolaSPAREngim等公司,负责系统设计,芯片设计及测试,人员进度控制等工作。曾获得加拿大安省优秀科技研究奖。2001年参与加拿大卫星网络计划并主管射频部。2002年参加由美国国防部、Lockheed MartineTRW共同实施的低轨道卫星AstroLink计划并负责射频芯片部分。同年受邀任美国IEEE ISCAS兼职评委。2003年在美国设计出世界首款多信道无线局域网芯片并量产。此外还负责过CDMA/AMPS/ TD-SCDMA/GSM/PHS手机芯片、雷达等芯片的研制和设计。目前在从事北斗导航芯片的研发。

2006年被南京市评为高层次留学人员;2007年被北京朝阳区评为企业创新型青年科技人才;2010年获“卫星导航定位优秀工程和产品 奖”;2011年入选江苏省双创人才(百人)计划。

叶松发表论文16篇,EI收录9篇,个人专利5项,研究生导师,教授职称(2012)。

4)王俊峰,1992年东南大学生物医学工程本科毕业,1995年获清华大学硕士学位,1997年获美国麻省理工学院硕士学位,1999年获麻省理工学院博士学位,1999年至2001年在摩托罗拉公司任资深CAD研究工程师,20012002年在AMCC任资深设计工程师,2002年至2004Entropic Communications Inc.任资深设计工程师、芯片架构师、项目经理,2004年至2005年在Amedia Networks Inc. 资深设计工程师、项目经理,2005年至2006年在Cygnus Communication, Inc.任资深工程师,2006年至2008年在Broadcom Corporation任无线通讯互联首席工程师,2008年至今任恒原微电子(上海)有限公司总裁和首席技术官,2012年开始任南京宇都通讯科技有限公司总经理,南京市“321”人才计划专家。

五、任课教师信息(包括主讲教师):

任课

教师

学科

(专业)

办公

电话

住宅

电话

手机

电子邮件

通讯

地址

邮政

编码

王志功

电路与系统




zgwang@seu.edu.cn



胡庆生

电路与系统




qshu@seu.edu.cn



叶松

博纳雨田




shawn@bonarf.com



王俊峰

恒原微电子








六、课程开设审批意见

所在院(系)

审 批 意 见



负责人:

日  期:

所在学位评定分

委员会审批意见



分委员会主席:

日  期:

研究生院审批意见




负责人:

日  期:

备   注


说明:1.研究生课程重开、更名申请也采用此表。表格下载:http: /seugs.seu.edu.cn/down/1.asp

2.此表一式三份,交研究生院、院(系)和自留各一份,同时提交电子文档交研究生院。














Application Form For Opening Graduate Courses

School (Department/Institute)School of Information Science and Engineering

Course Type: New Open □   Reopen □   Rename □Please tick in □, the same below

Course Name

Chinese

电子系统工程设计

English

Engineering Design of Electronic System

Course Number

MS004218

Type of Degree

Ph. D


Master

Total Credit Hours

32

In Class Credit Hours

32

Credit

2

Practice


Computer-using Hours


Course Type

Public Fundamental    □Major Fundamental    □Major Compulsory     □Major Elective

School (Department)

School of Information Science and Engineering

Term

Spring

Examination

A. □PaperOpen-book   □ Closed-book)  B. □Oral   

C. □Paper-oral Combination                       D. □ Others

Chief

Lecturer

Name

Zhi-Gong Wang

Professional Title

Professor

E-mail

zgwang@seu.edu.cn

Website


Teaching Language used in Course

Chinese

Teaching Material Website


Applicable Range of Discipline

Electronic and Information Engineering

Name of First-Class Discipline

Electronic Science and Engineering

Number of Experiment


Preliminary Courses


Teaching Books

Textbook Title

Author

Publisher

Year of Publication

Edition Number

Main Textbook






Main Reference Books

Modern Receiver Front-Ends

Joy Laskar, Babak Matinpour, etc.

John Wiley & Sons, Inc.

2004













  1. Course Introduction (including teaching goals and requirements):

In this course, students will be indoctrinated with the basic engineering design concepts and methods mainly through specific development cases of electronic systems. It plays a guiding role for students to participate in the future development of system engineering. Main contents include: the general flow and method of engineering design of electronic system, design cases of communication systems and integrated circuits and etc.  The distinguishing feature is that the combination of basic theoretical explanations and the practical introductions presents a lot of design cases to the students, so that help students to develop electronic systems engineering design concepts, and to lay a good foundation of further development of the professional master's engineering capabilities.


  1. Teaching Syllabus (including the content of chapters and sections. A sheet can be attached):

Chapter 1. Design and Case Study of Optical Fiber Communication System

Chapter 2. Design and Case Study of Biological Information Acquisition, Processing, Communication System

Chapter 3. Design and Case Study of Communication System Based on FPGA

Chapter 4. Design and Case Study of Wireless Transceiver Chips

Chapter 5. Design and Case Study of Wideband Wireless Communication System  


  1. Teaching Schedule:

Week

Course Content

Teaching Method

1

Design and case study of optical fiber communication system (I)

Lecture

2

Design and case study of optical fiber communication system (II)

Lecture

3

Design and case study of biological information acquisition, processing, communication system

Lecture

4

Design and case study of communication system based on FPGA

Lecture

5

Design and case study of wireless transceiver chips (I) (Industry)

Lecture

6

Design and case study of wireless transceiver chips (II) (Industry)

Lecture

7

Design and case study of wideband wireless communication system

Lecture

8



9



10



11



12



13



14



15



16



17



18



Note: 1.Above item 1, 2, and 3 are used as teaching syllabus in Chinese and announced on the Chinese website of Graduate School. Item 4 and 5 are preserved in Graduate School.

2. Course terms: Spring, Autumn, and Spring-Autumn term.  

3. The teaching languages for courses: Chinese, English or Chinese-English.

4. Applicable range of discipline: public, first-class discipline, second-class discipline, and third-class discipline.

5. Practice includes: experiment, investigation, research report, etc.

6. Teaching methods: lecture, seminar, practice, etc.

7. Examination for degree courses must be in paper.

8. Teaching material websites are those which have already been announced.

9. Brief introduction of chief lecturer should include: personal information (date of birth, gender, degree achieved, professional title), research direction, teaching and research achievements. (within 100-500 words)


  1. Brief Introduction of Chief lecturer:

(1). Zhi-Gong Wang, is a professor and a doctor tutor. From 1977 to 1981, he worked on radio communication techniques and computer aided circuit designs in Nanjing Institute of Technology. During 1982-1984 he worked as a lecturer on semiconductor circuit techniques in Tongji-University, Shanghai. From 1985 to 1990, he worked on high-speed silicon bipolar circuit designs for multi-gigabit/s optic fiber communication in Ruhr-University Bochum. From Oct. 1990 to Sept. 1997, he has been with Fraunhofer-Institute of Applied Solid State Physics, Freiburg, Germany, working on high-speed GaAs ICs for optic-fiber data transmission and MMICs. Since Oct. 1997, he is full professor of Southeast University, Nanjing, China.

He is the author or co-author of 20 books and more than 400 SCI/EI-cited papers, and inventor of 30 patents.

Recently, he is involving in IC design for optic-fiber transmission systems, for RF wireless, microwave, and millimeter wave applications, and in micro-electronic systems for bio-medical applications.

He is Senior Member of IEEE since 1993, Chairman of the Advisory Committee of Electrical and Electronica Basic Courses of Chinese Universities.

He is Guest Professor of more than 20 universities of China, Canada, and Australian.

(2). Qing-Sheng Hu, is a professor and a doctor tutor. She received her PhD from Shanghai Jiao Tong University in 1997. From 1997 to 1999, she worked as a post-doctoral researcher in University of Science and Technology of China. From 1999 to 2002, she has been with ZTE Corporation, working on networking products.. From 2002 to 2003, she has been with Hong Kong University of Science and Technology, and designed a 256x256 high speed network scheduling chip as the main participate of the RGC project “High Performance Network Switching System”. Since 2003, she works at School of Information Science and Engineering, Southeast University.

(3). Song Ye, graduated from University of Toronto, where he was an apprentice to Professor C. Salama, Professor K. Martineand Professor J. Long, formicroelectronics andcommunicationsdoubledegree. From 1990 to 1995, he worked on secure communication. From 1996 to 2005, he worked for OKI, Motorola, SPAR and Engim, and was in charge of several national projects of USA, Canada and Japan government. He is the author of 16 papers, and inventor of 5 patents. Since 2012, he gets a professor title and is a master’s supervisor.

(4). Jun-Feng Wang, received B.S degree in biomedical engineering from Southeast University in 1992, M.S degree from Tsinghua University in 1995 and from MIT in 1997, PhD from MIT in 1999. From 1999 to 2001, he was a senior research engineer of CAD in Motorola. From 2001 to 2002, he was a senior design engineer in AMCC. From 2002 to 2004, he was a senior design engineer, a chip architect and a project manager in Entropic Communications Inc. From 2004 to 2005, he was a senior design engineer, and a project manager in Amedia Networks Inc. From 2005 to 2006, he was a senior engineer in Cygnus Communication, Inc. From 2006 to 2008, he was a chief engineer of wireless internet communication in Broadcom Corporation. Since 2008, he is the president and CTO of Panovel Technology Corporation. Since 2012, he is the general manager of Yudutongxun.




  1. Lecturer Information (include chief lecturer)

Lecturer

Discipline

(major)

Office

Phone Number

Home Phone Number

Mobile Phone Number

Email

Address

Postcode

Zhi-Gong Wang

Circuits and Systems




zgwang@seu.edu.cn



Qing-Sheng Hu

Circuits and Systems




qshu@seu.edu.cn



Song Ye

Bona Rainfield Electronics Ltd




shawn@bonarf.com



Jun-Feng Wang

Panovel Technology Corporation








10